ROTARY DRUM BLANCHER,
48 inch diameter by 16 foot long,
stainless steel...

A hot water rotary blancher for pasta, rice, dry beans, green beans, carrots, corn, mushrooms, beets, potatoes, sous vide, and many other vegetable & fruit products with through-put rates dependent on product density and hold times. Hot water rotary blanchers are manufacturer rated for uniform heating and controlled transfer, and gentle agitation, with easy to clean sanitary construction, and high capacity in a small footprint.

FEATURES:

• 16 foot long blancher zone.
  
  
• 1/16 inch drum screen perforations.
  
  
• Paddle discharge with perforated chute & catch pan water return.
  
  
• Food grade USDA sanitary stainless steel construction with removable screen panels for cleaning and sanitation.
  
  
• Hydraulic powered cylinder one-way cover lift.
  
  
• 208 / 230 volt 3 phase electrical input control panel - included AS-IS.
  
  
• Last use for blanching peas.

As of this writing, this hot water rotary blancher is in stock at ALARD, in EXCELLENT condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular blanching needs.

ALARD item reference #: Y5560

GOOSENECK CONVEYOR,
ELEVATING FEED BELT CONVEYOR,
16 inch wide cleated belt,
food grade, stainless steel...

Bock / North Star Engineered Products goose-neck elevating belt feed conveyor with flighted belt, to even-feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables. Useful as a peeling machine feed conveyor, inspection conveyor feeder, and widely applicable to feed all manner of downstream food processing or packaging equipment in the context of a fresh-cut, pre-cut, produce packing or other industrial food processing production line.

FEATURES:

• 20 inch wide by 36 inch long tapered stainless steel in-feed hopper, 39-inch infeed height.
  
  
  • Infeed end is configured to "mate" with an inspection table, available separately; --Call 315-589-4511 to confirm availability and get more details on our Y5551 or Y5552 inspection conveyors.
    
    
• 16 inch wide cleated belt with 3 inch high cleats on 12 inch centers.
  
  
• Gooseneck style conveyor with:
  
  
  • 86 inch long incline section.
    
    
  • 36 inch long horizontal discharge section.
    
    
  • 72 inch discharge height.
    
    
  • 5 inch high stainless steel sides.
    
    
• Open channel stainless steel frame with locking casters.
  
  
• Food grade sanitary stainless steel construction.
  
  
• Top mounted 1/2 HP drive motor.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this elevating belt conveyor with hopper in-feed is in stock at ALARD in very good operational condition, and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing needs.

ALARD item reference #: Y5564

Kason DEWATERING SIEVE for solids-liquid separation, food grade, stainless steel...

This Kason Cross-Flo STATIC DEWATERING SIEVE, Model CF-4854-SS stationary screen is a static liquid-solids separator screen for waste-water recovery, water reclaim, and/or recapturing products such as peas, beans, corn, diced or chopped vegetables from washing, chilling, or rinsing flume water. The Kason hydrosieve water reclaim screen is also useful for rough screening of process water to remove stems, seeds, peels, pods, sticks, leaves, meat waste, and other food waste or foreign material in water recovery reuse; --and/or to reduce municipal costs and fines from BOD, TSS and/or TKN in your plant waste water.

FEATURES:

• Water sifting hydro-screen measures 48 inches wide by 52 inches long.
  
  
• Threaded rod adjustable pitch screen with .040 inch sieve openings.
  
  
• Solids run off the bottom of the screen:
  
  
  • 45 inch long by 48.5 inch wide solids discharge chute tapers to 40 inches wide.
    
    
  • Two (2) 18 inch pneumatic cylinders control angle of discharge.
    
    
  • Manual Up / Down control.
    
    
  • Compressed air input required for power assist screen angle adjustment operation.
    
    
• Overhead waterfall disperses product evenly across the entire screen for optimal laminar flow.
  
  
  • Two (2) 3 inch diameter inlets with Tri clamp connections.
    
    
  • Chambered to allow operation of left only, right only or blend of both inlets.
    
    
• 8 inch diameter cleanout access on each side - allows access behind the screen.
  
  
• 6 inch diameter filtered liquid outlet with Tri-clamp connection.
  
  
• All food grade sanitary stainless steel construction.

As of this writing, this Kason hydrosieve waste-water recovery screen is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your waste water handling needs.

ALARD item reference #: Y5498

Z-SHAPED
ELEVATING BELT CONVEYOR,
20 inches wide flighted belt, food grade stainless steel...

VIDEO DEMO
Z-conveyor, food grade, stainless steel, Y4311
from Alard Equipment Corporation.

A Z-CONVEYOR, food grade, stainless steel, with a solid interlocking plastic chain belt with curved cup shaped cleats.

FEATURING:

• Z-shaped belt conveyor configuration:
  
  
  • 26 inch long horizontal infeed section.
    
    
  • 44 inch vertical incline section.
    
    
  • 26 inch horizontal discharge section.
    
    
  • 18 inch infeed height.
    
    
  • 45 inch discharge height.
    
    
• 20 inch wide interlocking plastic chain type cleated conveyor belt with 4 inch high cupped cleats on 8 inch centers.
  
  
• All stainless steel conveyor body including legs.
  
  
• Fractional horsepower 3 phase belt drive.
  
  

As of this writing, this Z-belt conveyor is in stock at Alard in VERY good operational, mechanical and electrical condition, available for immediate service and shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular elevating feed belt conveyor needs.

Alard item reference #: Y4311

BELT CONVEYOR, 25x8,
food grade, stainless steel.

DEMO VIDEO
CONVEYOR BELT, 25 feet long,
food grade, stainless steel,
in stock, item #:Y4017
from Alard Equipment Corporation.

A food grade stainless steel frame conveyor belt, complete with drive.

FEATURES:

• 8 inch wide by 25 foot long conveyor belt.
  
  
  • Food grade white rubber belt.
    
    
  • Approximately 50 feet per minute.
    
    
• 4 inch high stainless steel sides.
  
  
• Control box with ON/OFF switch.
  
  
• 25 inch minimum / 41 inch maximum working height - mounted on adjustable height legs with locking casters.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 1/2 HP drive motor.
  
  
• 110 / 220 volt single phase electrical input.

As of this writing, this conveyor belt is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food conveying needs.

ALARD item reference #: Y4017

ELEVATING SCREW CONVEYOR, HOPPER, SCREW-FEEDER,
 11x16 incline auger,
food grade, stainless steel,
7 foot discharge height.

DEMO VIDEO
ELEVATING SCREW CONVEYOR, HOPPER-FEEDER
food grade, stainless steel, Alard item Y4978
from Alard Equipment Corporation.

An MTC Model MTC16-11 hopper inclined SCREW-FEEDER to elevate and convey raw or processed food product from in-feed to down-line food processing equipment, such as peeling, dicing, or packaging equipment. An 11 foot long by 16 inch food grade, stainless steel, screw-auger elevating conveyor with safety grid.

FEATURES:

• Tapered infeed hopper measuring 60 inches long by 60 inches wide by 52 inches deep with top stainless steel safety grid.
  
  
• 11 foot long by 16 inch diameter screw auger with flights on 16 inch centers.
  
  
• Screw trough equipped with full-length bolt-on stainless steel safety shroud.
  
  
• 50 inch infeed height / 76 inch high discharge.
  
  
  
• All food grade sanitary stainless steel construction including new legs.
  
  
• 3 HP motor with reducer and shrouded chain drive geared for 90 rpm.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this refurbished incline auger feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product equipment needs.

ALARD item reference #: Y4978

Urschel Model GRL
FRENCH FRY CUTTER, STRIP CUTTER,
DICER...
 

The Urschel GRL is designed specifically for strip cutting plain and crinkle cut potato strips / French fries for longer cuts with greatly reduced fines.

FEATURES:

• Manufacturer rates for potatoes up to 9 inches (230 mm) in length.
  
  
• A two-dimensional cutter:
  
  
  • Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    
    
  • INCLUDES one-set of cutting parts we have in stock, to be installed prior to shipment.
    
    
    • A variety of refurbished cross cut spindles are available - CALL ALARD at 315-589-4511 for current availability and to discuss your particular cutting specifications.
      
      
• Low maintenance - only two moving parts.
  
  
• Aftermarket electrical control panel with safety interlock system (cuts power to the machine if safety guards are removed) to be installed prior to shipment.
  
  
• Stainless steel frame and shrouding.
  
  
• New dimpled / non-stick surface infeed chute.
  
  
• "Urschalloy" slice shell and impeller.
  
  
• 2 HP drive 3 phase motor.
  
  
• 208/230/460 volt electrical input - please let us know your voltage requirements.

As of this writing, this Urschel GRL potato strip cutting machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL ALARD 315-589-4511 for current availability and discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs

ALARD item reference #: Y4787

Bruynooghe
VIBRATORY FEED CONVEYOR,
ALIGNER, 118 x 39,
food grade, stainless steel...

DEMO VIDEO
VIBRATING DEWATERING SHAKER ALIGNER, Y4689
from Alard Equipment Corporation.

A Bruynooghe DEWATERING SHAKER-ALIGNER, four deck / three step vibrating feeder, orients elongated fruit & vegetable products into a single direction. An aligning feeder for food products such as green beans, carrots, peppers, pickles, cucumbers, celery, zucchini, leeks, french fries and other strip cuts, stick cuts and more.

FEATURES:

• 39 inch wide by 118 inch long
  
  
• 13.75 inch long solid infeed.
  
  
• Three (3) screen sections:
  
  
  • 19.25 inch long each.
    
    
  • 1/8 inch rods and 3mm sieves -- rods are inline with flow.
    
    
  • 1/4 inch step down between each screen section.
    
    
• 3 inch drop to six (6) lanes.
  
  
  • Four (4) individual 1.25 wide aligners per lane..
    
    
  • Last 8 inch is angled down to more gently convey product downstream.
    
    
• 97 inch high infeed, 88 inch discharge height
  
  
• All food grade sanitary stainless steel construction.
  
  
• Vibratory action provided by two (2) 2.5 HP rotary / eccentric vibrator  motors.
  
  
• 575 volt 3 phase electrical input (optional transformer available separately).
  
  

As of this writing, this vibrating shaker/aligner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y4689

COMMERCIAL CABBAGE CUTTER,
26 INCH, industrial-capacity
food grade stainless steel vegetable
SLICER / SHREDDER / STRIP CUTTER...

A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for lettuce, cabbage, onions, peppers, cucumbers, potatoes, carrots, tomatoes and celery.

FEATURES:

• 26 inch diameter aluminum frame cutting disk with stainless steel knives; 100% cutting surface.
  
  
• Flared in-feed hopper, tapered hopper discharge.
  
  
• "Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.
  
  
• Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products (up to 9 inch diameter).
  
  
• Manufacturer rated for up to 25,000 pounds per hour, depending on cut size and product.
  
  
• A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length. Grater blades are also available for shredding carrots, slaw, onions, and other fresh vegetables. CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.
  
  
• Food grade stainless steel construction, including tubular stainless steel frame.
  
  
• Complete with two (2) 1.5 HP gear-motor drives - one for main cutting wheel and the other powers plow.
  
  
• 208/230 volt 3 phase electrical input.
  

As of this writing, this capacity slicing and strip cutting machine is in stock at Alard, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing and strip cutting needs.

ALARD item reference #: Y5334

COLUMN LIFT,
CART DUMPER, PORTABLE,
USDA, all stainless steel...

E-QUIP Column Dumpers are renowned for quality and dependable service. The Model 320 standard duty column cart dumper is manufacturer rated to handle up to 1,000 lbs and equipped with an anti-drop lock feature to prevent free-fall in the event of chain failure.

 FEATURES:

• 72 to 82 inch adjustable dump height.
  
  
• Manufacturer rated for up to 1,000 lb lift capacity.
  
  
• 26 inch wide cradle - fits standard meat buggies.
  
  
• Stainless steel lift chain.
  
  
• Anti-drop lock feature for added safety.
  
  
• Mounted on a factory caddy frame with casters & floor brake - does not require bolting to floor.
  
  
• Operator control panel with On / Off, Up & Down switches.
  
  
• 2 HP drive motor.
  
  
• 208/230 volt 3 phase electrical input.
  
  

As of this writing, this meat buggy lift & dump is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5598

ACCUMULATION DISK,
PACK-OFF DISC, TURNTABLE,
48 inch diameter stainless steel disc,
accumulating table, with drive
and variable speed control...

A Kleenline 48-inch diameter stainless steel turntable accumulating disc, pack-on disc, pack-off disc for food packaging line container handling applications.

FEATURING:

• 48 inch diameter disc.
  
  
• 32 inch working height on adjustable threaded rod feet.
  
  
• Underside turn-table rollers for disc support of heavy product loads.
  
  
• All food grade sanitary stainless steel.
  
  
• 1/2 HP drive with variable speed control.
  
  
• 110 volt single phase (household current) electrical input.
  
  

As of this writing, this 48 inch disc accumulation table is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging line equipment needs.

ALARD item reference #: Y5357

FOOD GRADE PISTON TRANSFER PUMP, food grade stainless steel...

A food grade stainless steel pneumatic piston food pump to gently transfer your flowable products to your filling, depositing or processing line. They are also used for pumping products to and from cooking or holding tanks for further processing. The volumetric positive displacement action of this plunger pump "pulls" for self-priming, and pushes even viscous, hard-to-handle products positively. This type of gentle, low shear piston pump configuration is widely used for transferring shear-sensitive food products including pie filling, soups, soup bases, pasta sauces, BBQ sauce, BBQ meat with sauce, deli salads, macaroni and cheese, muffin batter, cake batter, guacamole, coleslaw, stew, refried beans, chili, cheese sauce and many other foods.

FEATURES:

• Pneumatically operated.
  
  
• 9.5 inch diameter bore by 9 inch stroke piston cylinder - delivers approximately 2.5 gallons per stroke.
  
  
• 4 inch diameter inlet/outlet with sanitary Triclamp connections.
  
  
• Food grade sanitary stainless steel construction with UHMW piston.
  
  
• Mounted on a stainless steel cart with casters for added mobility.
  
  
• Previously used in USDA inspected "wet salad" production and packing lines.
  
  
• Compressed air input required for operation.
  
  

As of this writing, this Piston Xfer Pump is available at ALARD, in EXCELLENT operational, mechanical pneumatic & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food handling needs.

ALARD item reference #: Y5369

URSCHEL MODEL RA-D DICER, dicing machine, cheese cutter...

This Urschel Model RA-D CHEESE DICER is mechanically the same as the Model RA or RA-A dicer with minor variations so as to be manufacturer rated for USDA sanitary dairy product processing applications. As with the RA and RA-A models, this is a 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as cheeses, pickle relish, salsa, fruits, vegetables, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies.

FEATURES:

• Three cutting dimensions:
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 1/16 to 3 inch (1.6 to 76.2mm) - change part.
    
    
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
  
• Four (4) paddle impeller.
  
  
• Currently set for 94 inch infeed height, 52 inch discharge height.
  
  
• Marchant-Schmidt custom fabricated aftermarket frame for high level discharge height.
  
  
• USDA dairy sanitary stainless steel construction.
  
  
• Stainless steel factory control box and safety INTERLOCK system.
  
  
• 10 HP drive.
  
  
• 208/230 volt 3 phase electrical input.
  
  

As of this writing, this item is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment - needing only to be set up with change parts prior to shipping.

CALL 315-589-4511 to confirm availability and discuss your particular high-capacity food process cutting equipment needs.

ALARD item reference #: Y5735

CHERRY-BURRELL Model 134 SANITARY ROTARY LOBE PUMP, RECTANGULAR INFEED, positive displacement, with drive and base...

A CHERRY-BURRELL sanitary PD (positive displacement) twin lobe pump, with rectangular flange inlet, is manufacturer recommended for pumping highly viscous and/or sticky substrate such as meat, pet food, dough, fondant, cheese plus other similar difficult to handle products in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications.

FEATURES:

• USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover & shaft with easy disassembly for cleaning and sanitation.
  
  
  • 3 inch by 9 inch rectangular flanged infeed opening.
    
    
  • 29 inch long by 22 wide by 28 inch deep tapered hopper.
    
    
  • 3 inch Tri-clamp discharge.
    
    
• 5 HP stainless steel shrouded motor with variable speed control.
  
  
• Approximately 100 gallons per minute (maximum) - throughput dependent on product viscosity and head pressure (pump curves available on request).
  
  
• Manufacturer rated for up to 400 rpm and 150 psi working pressure.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this rectangular in-feed lobe pump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5714

VOLUMETRIC AUGER FEEDER with HOPPER,
1.5 inch diameter feed tube, bulk solids metering feeder, food grade, stainless steel...

DEMO VIDEO
AccuRate 600 Bulk Solids Metering Feeder, Y5711
from Alard Equipment Corporation.

A Schenck AccuRate 600 series "Tuf-Flex" mass flow hopper, dry ingredient feeder, is designed to handle virtually any dry material, including fine powders, granules, flakes, fibers, dry coatings, spices, seasonings, chips & pellets, without packing or bridging. The product feed hopper features a flexible vinyl chamber which is externally massaged for continuous even flow of uniform material. AccuRate Volumetric Series Feeders are manufacturer rated for industrial process applications including food, pharmaceutical, chemical, plastics and more.

FEATURING:

• Manufacturer rated for +/- 0.5% to 3.0% accuracy - depending on materials & flow rate.
  
  
• 30 inch square by 30 inch deep tapered stainless steel hopper.
  
  
  • Flexible vinyl feed chamber with external thumpers.
    
    
  • Solid stainless steel cover.
    
    
  • 24 inch long feed tube.
    
    
  • 1 1/8 inch diameter auger.
    
    
• 79 inch high infeed, 38 inch discharge height.
  
  
• Stainless steel stand.
  
  
• 1/4 HP drive with 3-speed controller.
  
  
• 110 volt single phase electrical input.

As of this writing, this volumetric feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing equipment needs.

ALARD item reference #: Y5711

ROBINS DRAGO DESTONER
riffle-board WASHER, Model TME,
food grade, all stainless steel...

VIDEO DEMO
Robins-Drago DESTONER, tramp metal eliminator Y3612
from Alard Equipment Corporation.

The Robins Drago washboard tramp metal eliminator (TME) is designed to remove foreign materials such as rocks, stones, pebbles, gravel, sand, glass, bone, and / or metal contaminants as small as .020 inch in size, as long as the food product is less dense than the foreign matter and the specific gravity of the foreign matter is less than one. Manufacturer recommended for dried beans, vegetables, fruits, pickles, seafood and many other destoning applications.

FEATURING:

• Manufacturer rated for a maximum throughput of approximately 7,000 to 10,000 lbs per hour.
  
  
• 24 inch wide by 56 inch long riffle board type operation.
  
  
• Flush lift lever for debris removal and/or daily sanitation practices.
  
  
• 36 inch wide by 88 inch long by 36 inch deep tank.
  
  
  • Side mounted tank catches trash/stones dislodged from the riffle troughs.
    
    
  • Three (3) 4 inch diameter brass valves - inlet, outlet & side tank.
    
    
• 24 inch wide by 64 inch long wire woven stainless steel elevating discharge belt.
  
  
• NEW 2-inch submersible water circulation pump - approximately 150 gallons per minute.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 3/4 HP chain drive washdown motor.
  
  
• 208/230/460 volt 3 phase electrical input.

As of this writing, this riffle board destoner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

ALARD item reference #: Y3612

IMMERSION WASHER for PRODUCE,
with AIR INJECTION for TURBULENT washing,
food grade, stainless steel.

DEMO VIDEO
Heinzen IMMERSION WASHER,
for fruit & vegetable products, air injected, turbulent flow, Y5285
from Alard Equipment Corporation.

The Heinzen Model FW30 is a versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This immersion washer, with forced air bubbles, is like a gentle Jacuzzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.

WASHER:

• 26 inch wide by 13.5 foot long main tank.
  
  
• Two (2) air injection sections.
  
  
• Two (2) 8 inch wide stone traps.
  
  
• Plastic interlocking chain top belt:
  
  
  • 1/2 inch by 3/8 inch openings for removal of floating fines.
    
    
  • Two (2) immersion sections.
    
    
  • Fractional horsepower roller drive.
    
    
  • Belt lifter for ease of cleaning & sanitation.
    
    
• Two (2) 6 inch wide skim troughs.
  
  
• Side mounted 48 inch long by 8 inch wide hydrosieve screen effectively filters wash water of leaves, stems, fines & other debris resulting from the washing process.
  
  
• Air pump powered by a 5HP stainless steel shrouded motor.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208/230/460 volt 3 phase electrical input.

Cornell Model 4WB CENTRIFUGAL RECIRCULATION PUMP:

• Manufacturer rated for 300 to 500 gallons per minute.
  
  
• 7 inch diameter bronze impeller with double curvature vanes.
  
  
• Stainless steel volute.
  
  
• 5 inch diameter inlet / 4 inch diameter outlet with flanged fittings.
  
  
• 7.5 HP 1725 rpm direct drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

DEWATERING & DISCHARGE CONVEYOR over RECIRCULATION TANK:

• 30 inch wide by 56 inch long by 28 inch deep recirculation tank.
  
  
• 30 inch wide by 66 inch long interlocking plastic chain belt.
  
  
• 46 inch high discharge on adjustable threaded rod feet.
  
  
• 1HP stainless steel motor & gear box.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this greens washer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food equipment needs.

ALARD item reference #: Y5285

HOPPER-FEEDER,
with elevating belt conveyor,
food grade, stainless steel.

DEMO VIDEO
Heinzen HMI HOPPER-FEEDER,
elevating feed belt, item Y4381
from Alard Equipment Corporation.

A Heinzen / HMI raw product infeed hopper with elevating belt discharge / belt feeder for bulk raw product infeed; to discharge an even product flow to your downstream processing and packaging equipment.

FEATURING:

• NEW 26 inch wide by 11 foot long rubber belt.
  
  
• 48 inch wide by 26 inch deep stainless steel flared infeed hopper.
  
  
• 49 inch high infeed, 52 inch discharge height - adjustable threaded rod feet.
  
  
• Top mount 1HP stainless steel roller drive geared for 78 feet per minute belt speed.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this inclined conveyor hopper-feeder is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4381

BAG PACKING TABLE,
2-station, food grade stainless steel,
for fill by weight, with scales & bag holders...

An Alard Model BT2020 2-spout food grade stainless steel net-weigh bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products.

FEATURES:

• This stainless steel two-person BAGGING TABLE measures 43 inches long by 75 inches wide with sides that taper from 13.75 inches high at the back down to 5.75 inches in the front.
  
  
• This bag filling manual pack table features an angled back to feed product closer to the operator's reach. The flat-bottom portion of the table is only 29.5 inches in depth (from front to back), while the angled back-stop allows for additional full-load capacity.
  
  
• Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.
  
  
• Each bag-filling station has a standard 6.5 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for smaller bag sizes.
  
  
• Each filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.
  
  
• Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjustable to accommodate different bag lengths.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 110 volt single phase (household current) electrical input.
  
  
• Compressed air required for the pneumatic bag holders.
  
  
• NEW - not a pre-owned piece.

OPERATION:

• Each operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.
  
  
• The operator then pulls product from the table into the filling tube until the proper weight is made.
  
  
• Overages can easily be removed.
  
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.

As of this writing, this bag filler table is in stock at Alard, now, fully assembled and ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5693

FOUR ROLL BRUSH WASHER,
ROOT CROP-WASHER / SCRUBBER,
for potatoes, carrots, and other fruits and vegetables,
stainless steel, in-stock NEW...

A versatile continuous brush washer for scrubbing ROOT CROPS. Offered here with brushes as a continuous four roll brush-washing scrubbing and/or pickle washing machine. It can also be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler, scrubber, or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and other raw fresh produce items

OPERATION:

Raw product is continuously fed to the brush-washing / peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action are provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine. The water spray, rotating brushes and friction of the products rubbing against each other tumble and turn the product so that it is thoroughly scrubbed from every conceivable angle.

FEATURES:

• 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.
  
  
• Currently configured with four (4) .018 black poly brush rolls for removing field dirt, debris, peel and rot spots, as well as other washing, scrubbing, and finishing applications. Can be set up with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeling, scrubbing, action. Call 315-589-4511 to discuss your particular scrubber, washer, peeler application.
  
  
• Each spinning brush roll is 6 inches in diameter by 6 foot long.
  
  
• Lubricating and rinsing action are provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
  
  
• Scrubbed, polished, peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler / washing exposure; --at a 39 inch discharge height.
  
  
• Water, dirt, stems, leaves, peels, and other debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet. CALL 315-589-4511 to discuss your water reclaim screen requirements.
  
  
• Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing) and the degree of finish desired.
  
  
• The abrasive brush rolls are mounted parallel (in-line) with product flow.
  
  
• Complete with central lubrication cluster for ease of maintenance.
  
  
• Chain / sprocket drive powered by a WASHDOWN 3HP 208 / 230 / 460 volt 3 phase 60 cycle constant speed motor.
  
  
• We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box - call 315-589-4511 for current pricing.

As of this writing, ALARD EQUIPMENT has this model available NEW in stock and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fruit and / or vegetable peeling and washing equipment needs.

ALARD item reference #: Y5592

BIN DUMPER / TOTE DUMPER,
USDA sanitary food grade stainless steel,
for 40 by 48 inch bins, hydraulic powered;
--IN STOCK NEW...

Alard Model BD40A Bin Dumper, USDA sanitary food grade stainless steel, floor-level in-feed, forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURING:

• Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.
  
  
• Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.
  
  
• Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. inside the bin holder); with continuously welded smooth seams all around the interior.
  
  
• Heavy duty tubular stainless steel base frame construction.
  
  
• Dump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).
  
  
• Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.

As of this writing, this USDA sanitary food grade stainless steel floor-level infeed BIN DUMPER is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5641

BIN DUMPER / TOTE DUMPER,
USDA food grade sanitary stainless steel,
for up to 48 inch by 48 inch bins, with hydraulic power;
--IN STOCK NEW...

Alard model BD48A food grade USDA sanitary stainless steel, floor level in-fee, forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, pallet boxes, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURES:

• Sized for 48 inch wide or smaller totes, with bin-holder measuring 54 inches wide by 48 inches long by 42 inches deep.
  
  
• Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.
  
  
• Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.
  
  
• Heavy duty tubular stainless frame construction.
  
  
• Dump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).
  
  
• Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your specific bulk food product container dumping need.

As of this writing, this new forward bin dumper is stock at Alard, complete, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5640

ROTARY VANE FEEDER / METERING DRUM,
food grade, stainless steel...

A Key Technology Vari-Feeder for metering downstream flow and/or consistent proportioning of product mixes including vegetables, fruits, cereal, grains, berries, nuts, candy & more.

FEATURES:

• Manufacturer rated for up to 8,000 pounds per hour capacity.
  
  
• 12 inch wide by 9 inch diameter rotary drum.
  
  
• Rounded / cupped pocket vanes for improved sanitation.
  
  
• 12.5 inch by 7.5 inch long infeed opening.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 1/2 HP drive motor for 32 rpm at the drum.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this rotary airlock feeder valve is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food feeding / metering needs.

ALARD item reference. #: Y5133

Cornell Model 4WB CENTRIFUGAL PUMP,
5 inch in, 4 inch out, with 7.5 HP MOTOR,
food grade, stainless steel...

A Cornell Model W-series stainless steel body centrifugal pump designed for small flow capacity with minimum head pressure for a multitude of fluid handling applications ranging from food products, washing, rinsing, recirculation, irrigation, general industrial & municipal use.

FEATURING:

• Manufacturer rated for 300 to 500 gallons per minute - pump curves available upon request.
  
  
• 7 inch diameter bronze impeller with double curvature vanes.
  
  
• Stainless steel volute.
  
  
• 5 inch diameter inlet / 4 inch diameter outlet with flanged fittings.
  
  
• 7.5 HP 1725 rpm direct drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this centrifugal pump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process pump and bulk material handling needs.

ALARD item reference #: Y4811

ELEVATING CONVEYOR BELT,
14 inch wide, flighted belt,
food grade, stainless steel...

A food grade stainless steel incline feed conveyor for food processing applications with a horizontal in-feed and loading section.

FEATURING:

• 14 inch wide by 80 foot long interlocking chain plastic belt.
  
  
  • 2 inch high cleats on 12 inch centers.
    
    
  • 2.5 inch high sides.
    
    
  • 2 foot long horizontal infeed section.
    
    
• 7 inch high infeed, 48 inch discharge height - threaded rod adjustable feet.
  
  
• Operator control box with ON/OFF and E-stop.
  
  
• 1/3 HP variable speed motor.
  
  
• 220 volt single phase electrical input.

As of this writing, this elevating belt conveyor with horizontal packing in-feed section, is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

ALARD item reference #: Y5673

Scott Turbon HIGH SHEAR MIXER,
food grade, sanitary...

A sanitary stainless steel Scott Turbon Model HRSL 275 SANITARY HYDRAULIC RAM (HR) MIXER / EMULSIFIER / DISPERSER on a hydraulic ram / pneumatic power lift. Made by Scott Mixers, this full scale hydraulic ram batch mixer has an adjustable height mixing head, which allows for processing of various batch sizes and viscosities, with rapid dispersion and emulsification of ingredients.

FEATURING:

• Scott Turbon Model B mixer head for viscous/ thick liquids and emulsions; large diameter with toothed disc. Other mixer heads are available from the manufacturer. CALL 315-589-4511 to discuss your specific blending / emulsifying requirements.
  
  
• Manufacturer rated for applications such as mixing salad dressings, thick emulsions or other viscous products in dispersion, dissolution, suspension, particle size reduction, homogenization and emulsification applications.
  
  
• Stainless steel operator control panel with on/off & raise/lower.
  
  
• Food grade USDA sanitary stainless steel, 3A dairy sanitary construction, but applicable beyond food and beverage for other uses such as pharmaceutical and biotech mixing, as well as for cosmetic and personal care product mixing.
  
  
• 7.5 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  
• Requires compressed air input for ram operation.

As of this writing, this high-shear emulsifier blender is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process emulsifying / blending needs.

ALARD item reference #: Y5492

URSCHEL Model GK-A DICER,
strip cutter, French fry cutter, flat or crinkle cuts...

The Urschel GK-A is a three-dimensional cutting machine, manufacturer rated for product input size of up to 5.5 inches (140mm) in any dimension. Manufacturer recommended for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s) the Urschel GKA can also cut strips (two-dimensional cuts) such as for french fries and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or crinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss your cutting specifications!
  
  

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5661

KEY Iso-Flo
VIBRATORY DEWATERING SHAKER,
VIBRATING FEED CONVEYOR, 76x53,
food grade stainless steel...

A Key Technology Iso-Flo Model S1037504 vibratory shaker-grader feeder for grading, size sorting, fines removal, solids separation, water reclaim / dewatering, declumping and / or even-feeding downstream components.

FEATURES:

• 53 inch wide by 76 inch long vibrating conveyor bed.
  
  
  • 4 inch high stainless steel sides.
    
    
  • 12 inch long dimpled / rigidized solid infeed section.
    
    
  • Two (2) 53 inch wide by 24 inch long stainless steel woven-wire screens with 3/8 inch square sieve openings.
    
    
  • 16 inch long dimpled / rigidized solid discharge section.
    
    
• Water collection pan with 6 inch diameter tri-clamp center bottom outlet.
  
  
• Quick release clamps for easy, tool-less removal & cleaning of screens.
  
  
• Vibratory action provided by two (2) 2/3 HP rotary / eccentric vibrator motors.
  
  
• All food grade sanitary stainless steel construction including heavy duty tubular frame.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this vibratory shaker-grader is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5157

DEMO VIDEO
Key Iso-Flo VIBRATORY SIZE GRADER, 4x3,
food grade stainless steel,
SIZE-GRADING stainless steel washers.
Alard item Y4113

DEMO VIDEO Key Shaker-Grader Y4113
running leafy vegetable / lettuce
from Alard Equipment Corporation.

A Key Iso-Flo vibrating shaker with quickly interchangeable screen for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering, and even-feeding to downstream components.

FEATURES:

• 34 inch wide by 4 foot long shaker bed.
  
  
  • 6 inch long smooth infeed.
    
    
  • 36 inch long screen with 1-1/8 inch diameter perforations and quick release screen-retainer hooks for fast screen replacement / changeover.
    
    
  • 6 inch long smooth discharge lip.
    
    
• 4 inch high sides.
  
  
• Solid discharge pan for separation of graded materials.
  
  
• Overhead design.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Ajax eccentric with 1HP drive.
  
  
• 230 / 460 volt 3 phase electrical input.

As of this writing, this vibratory grader is in stock at ALARD, in EXCELLENT mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process grading equipment needs.

ALARD item reference #: Y4113

STATIC SCREEN SEPARATOR,
Alardsieve 24x36, all stainless steel...

A new Alardsieve 2436 water recovery screener / scalper sieve, for solids separation, wash-water filtration, and/or waste-water recovery. A Hydrasive type static screen sieve for separating solids from water and/or other liquids such as cooking oils.

This stationary screen is configured with a special triangular-rod / wedge-wire screen specifically designed for liquid-solid separation screening, with very precise and consistent sieve opening sizes. Product / solids in a liquid such as water or oil pass over the stationary screen. The liquid passes through the screen to a collection tank and drain, leaving the solids to pass over the screen for collection beneath.

An ideal separator for wash-water reclaim / reuse, by-product recovery, and / or otherwise removing solids from waste water in industrial food processing plant applications such as peeling, coring, and grading operations for removing stems, seeds, leaves, and other foreign materials from rinse water. Also commonly used in other municipal and plant waste-water treatment facilities for solids removal filtration.

FEATURES:

• 24 inch wide by 36 inch long (top to bottom) wedge-wire screen.
  
  
• .040 inch sieve-opening-size screen installed; --other standard sieve opening sizes can be sourced and installed to order, from .010 inch to .100 inch, with other sizes to be priced upon request. CALL 315-589-4511 to tell us YOUR sieve size specification.
  
  
• Screens are slide-out / slide-in interchangeable for a wide range of solids separation applications.
  
  
• 33 inch deep full-width infeed / head tank, tapering from 20 inches front-to-back at the top to 15 inches front to back at the bottom. The headbox is open and easily cleaned of debris such as stones or other such "heavies".
  
  
• Complete with dispersion shield over the weir to spread water evenly across entire screen, for optimal laminar flow.
  
  
• 4 inch threaded inlet, 6 inch threaded outlet; --allows for optional flange fittings to be screwed on, or for hose fittings to be cinched on to infeed and discharge connections.
  
  
• 4 inch diameter clean-out ports on either side (for easy access behind screen), with 1 inch tank drains at bottom level for comprehensive rinsing, cleaning and drainage of wash water.
  
  
• 1.25 inch diameter cleanout drain in each tank.
  
  
• Throughput capacity depends on screen sieve opening chosen. For example, with a .040 inch (1mm) sieve opening, a throughput capacity of approximately 400 gallons per minute capacity is feasible running non-greasy solids (actual throughput will depend on solids and flow characteristics).
  
  
• All food grade 304 stainless steel construction.
  
  
• Static screen / stationary screen water recovery sieve has no moving parts, making it a low cost, low maintenance and long-lived dewatering system.

As of this writing, this solids separation / static dewatering screen is new in stock at Alard, configured with a new .40" sieve screen, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your liquid solid separation equipment needs.

Alard item reference #: Y5639