food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
Model 6NHPP-F16K 6-inch hydro-transport FOOD PUMP...
on picture(s) to enlarge!
on picture(s) to enlarge!
Cornell 6 inch food pump with
flanged inlet and outlet connections. The
Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe
flume, open flume, wash flume, chill flume, disinfectant bath, or other
water conveyor configuration for gently conveying high volumes of whole
or cut food products in waterat tons-per-hour volume capacities.
6NHPP-F16K cast-iron hydro flow food pump
with stainless steel impeller, six-inch inlet and outlet. Stainless
steel body pump also available;--
call 315-589-4511 to discuss your specific requirements.
Manufacturer rated for solids handling ability
for product up to 4 inch diameter by
6 inches in length. Larger
diameter pumps are available for larger product sizes; -- call
315-589-4511 to discuss your specific application requirements.
Expanded volute PP series pump for the ultimate
in gentle handling of delicate food
products. So gentle the
manufacturer rates for pumping live fish!
Specifically designed and built for industrial
food processing application use, with tons-per-hour
recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by
RPM, and total dynamic head resistance. Pump curves are available by
request; -- call 315-589-4511 do discuss your specific application
NEW, with two-year manufacturer warranty.
Cornell hydro transport food pump is frequently employed to power open
stainless steel flume systems, while others, pump into a closed pipe
flume, which they run in a coil pattern on the ceiling to conserve
floor space. The flumes provide hold time to remove heat, and extend
exposure to the water, which usually includes either a sanitizing
agent, or a preservative solution such as vitamin C; depending on the
product. The power of the Cornell Hydro-Transport pump allows food
producers to deliver their now chilled and treated ingredients to any
point in the plant where they want to dry, mix and pack the final
Others use the chill flume for pre-cooling blanched (very lightly
cooked to kill the active enzymes) food products in water prior to
running them through an IQF freeze tunnel. Others use the flume system
just to convey product in water. In every case, the powerful Cornell
pump can gently move high tons-per-hour output to wherever it needs to
go in the plant.
Alard also stocks and custom-configures various kinds of dewatering,
solids-separation water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application. With Cornell's large range of
hydro-transport pump size and material configurations, and with Alard's
ability to configure and "gear" the pump to the buyer's specific needs,
Alard's Cornell Hydro-Transport food pumps are a superb tool for a wide
variety of industrial food processing applications.
As of this writing, this hydro-flow food pump is IN stock NEW, and
available for immediate shipment.
CALL 315-589-4511 to
confirm current availability, and to discuss your particular food
process bulk product conveying, chilling, cooling, sanitizing and
pumping equipment needs.
item reference #: Y3766
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.